SAVE TODAY - 15% OFF planked and flooded separate Nikkalite Crystal Grade kits - R3B COMPLIANT

Chevron kits from Fleet ID Blazon

Along with Chapter 8 kits, you can now order vehicle text, Chapter 8 signage, traffic cones and light bars at the same time. Fleet ID Blazon – The brighter way to a safer future.

Chapter 8 Chevron Kits plus much more with Fleet ID Blazon

Chapter 8 chevron kits are a must for any works vehicle that will be travelling on highways and entering works sites around the country. These highly effective ready to apply conspicuity kits are applied to the rear of fleet vehicles. The fluorescent yellow and reflective red chevrons increase visibility of the vehicles, keep entire fleets safe and help to maximise the safety of other road users too.

Each of the Chapter 8 rear chevron kits that we manufacture comply with Chapter 8 of the DFT Traffic Signs Manual, many also being R3B compliant. Your fleet is safe in our hands.

But we don’t stop there.

We know that along with rear chevrons, there are a whole host of other essential products that help to keep your work force safe and your fleet vehicle markings in tip top condition. That’s the driving force behind Fleet ID Blazon. This suite of safety products is designed to give you all the required vehicle markings, vehicle text decals, Chapter 8 signage, lightbars, traffic cones and barriers to keep your fleet safe and in full working order.

When you order Chapter 8 chevron kits from Fleet ID, all of these essentials are available at the click of a button too. Everything needed to keep a busy fleet road safe and ready for anything.

Buy fleet chevron kits plus much more here…

Chapter 8 Chevron Kits

Search our Chapter 8 Chevron Kits

Browse by Make/Model

Search

Registration Search

Search

Fleet ID Blazon – The brighter way to a safer future

Chapter 8 Chevron Kits

Fleet ID Blazon Chapter 8 kits are manufactured from the highest quality reflective red and fluorescent yellow materials. With our R3B compliant options, you can also choose to add text decals such as Highway Maintenance text.

Buy Chapter 8 kits here

Chapter 8 Signage and Barriers

Order all of the additional extras you may need for your fleet right here. Fleet ID Blazon Chapter 8 signage and barriers provide and easy to use signage solution, helping to raise the safety levels around your workforce.

Buy signage and barriers here

Application Tools

For those applying their own chevron kits and vehicle decals, you’ll need all the tools for the job. Fleet ID Blazon application tools allow for the smooth application of safety markings, helping to ensure the durability of the chevrons and providing that professional finish.

Buy application tools here

Light Bars

The Fleet ID Blazon range of light bars offer quick and easy solutions to lighting requirements. These light bars simply plug into the cigarette plug within the vehicle and attach either magnetically or with suction pads. No need for big alterations to your vehicles.

Buy light bars here

Your journey to a safer future

Take the pain out of keeping your fleet fully marked and road ready with Fleet ID Blazon. Now you can add vehicle text, Chapter 8 signage and traffic barriers and cones to your Chapter 8 order! Everything you need – all in one place.

Start your journey today

Chapter 8 kits recently added…

R3B compliant Chapter 8 kits

Chapter 8 guidance has changed in relation to conspicuity vehicle markings and many of our customers now need R3B compliant Chapter 8 kits. We’ve made choosing the right kits for your fleet really easy when ordering online with us and we’ve put together some useful information about the new guidance too.

Find out more about Chapter 8 guidance and what this means for your fleet

Get the right chevron kits for your fleet by answering these 4 questions…

What type of roads will your vehicles be used on?

If the vehicles will be operating or stopping on highways or entering work sites, then R3B compliant kits are needed. Select R3B Compliant when ordering your Chapter 8 kits.

What type of coverage do you need?

We supply full rear, half rear or full glazed Chapter 8 kits.
Which one you choose just depends on the type of vehicle you have and whether there are rear windows that you would like to keep clear.

Do you need any text on the rear of your vehicle?

You can choose from a number of vehicle text options to add to your Chapter 8 kits, including Highway Maintenance and Abnormal Load. These are available to order at the time of ordering your Chapter 8 kits.

What type of application is best for you?

All of our rear chevron kits are easy to apply, but we have planked, flooded separate and flooded applied to choose from.
There is also a magnetic option for those who need the kit to be popped on and off the vehicle as and when required.

Your journey to a safer future

Take the pain out of keeping your fleet fully marked and road ready with Fleet ID Blazon. Now you can add vehicle text, Chapter 8 signage and traffic barriers and cones to your Chapter 8 order! Everything you need – all in one place.

Start your journey today

Chevron Kits – why mark up your fleet vehicles?

Conspicuity markings can reduce accidents, can save lives and improve the visibility of the vehicle.

Fewer accidents mean less downtime, less contracts missed and savings on repair costs.

Reassure and motivate your workforce by taking their safety seriously and meet the highly recommended best practice guidance of TSM Chapter 8.

Protect your company against potential legal action related to third party safety.

Choosing your material

3M Chapter 8 Kits

We manufacture chevron kits from 3M Diamond Grade Microprismatic Red (4092), coupled with 3M Saturn fluorescent yellow for a durable chapter 8 kit. R3B compliant.

Product specification

Nikkalite Chapter 8 Kits

There are two Nikkalite products to choose from – Nikkalite Crystal Grade Microprismatic CVF Red (92805) (R3B compliant) and Nikkalite FEG (Flexible Engineering Grade). Both products offer high quality, just for different types of roads.

Product specification

Orafol Chapter 8 Kits

There are two reflective materials to choose from the Oralite range. For R3B compliant Chapter 8 kits, choose Oralite 6900 Brilliant Grade Microprismatic Red (030) and for all other uses Oralite 5200 Rapid Air is also available.

Product specification

Not sure which material is best for you?

Read our guide to all of the materials we convert here

Fleet ID Blazon Edge Sealed Chapter 8 Kits

Our Chapter 8 kits are supplied edge sealed which stops all dirt and water penetration to the cells in the panel ensuring there is no block to the light source. This keeps the reflective to the proper standard for its intended purpose.

Start your journey today

Browse all major vehicle manufacturers

All major vehicle manufacturers are covered by Fleet ID Blazon chevron kits. You can order Chapter 8 kits for any vehicle from Audi to Volkswagen! Browse through the manufacturers to find yours. Alternatively, if you know your registration number, pop it into the reg look up at the top of the page to be directed straight to the correct kit for you.

Browse for your vehicle here

Templating Service

Although there are thousands of Chapter 8 chevron kits available on our web shop, it is difficult to list all vehicles! If you find that your vehicle is missing, simply fill in our short contact form and we will check our complete catalogue of vehicles. If we don’t have the data for your vehicle, our professional templating team will create the kit for you.

Click here to let us know what you need

Browse all major vehicle manufacturers

All major vehicle manufacturers are covered here – you can order Chapter 8 kits for any vehicle from Audi to Volkswagen! Browse through the manufacturers to find yours. Alternatively, if you know your registration number, pop it into the reg look up at the top of the page to be directed straight to the correct kit for you.

Browse for your vehicle here

Good to know

Application Guide

An application guide showing all steps for the application process is supplied with every Chapter 8 kit order you will receive. This will help to ensure best possible application of your ordered Chapter 8 kit and answer any queries you may have about this process.

Click here for a full application guide

Certifications

We work hard to ensure that we are supplying the best possible materials and converting them into the best possible Chapter 8 chevron kits. You can find out more about the certifications we hold at the link below.

Click here for converter certifications

REMA Standards

Every kit we produce meets the standards set by REMA in manufacture, sealing and installation. Click on the link to find out more about REMA’s specific material requirements.

Find out more about REMA’s requirements

Chapter 8 FAQs

How do I apply a Chapter 8 kit to my vehicle?

Our Chapter 8 kits are really easy to apply. The reflective and fluorescent vinyl is self-adhesive and can be applied using a squeegee. Preparation is key to a successful chevron kit application, so please make sure you follow the guidance on the application guide that will be delivered with your kit. There are also instructions in the leaflet regarding cleaning and suitable environment for fitting too.

If you would prefer that we do the fitting for you, please contact us on 0344 2098775 for more information about our professional fitting service.

When will I receive my Chapter 8 kit?

Standard delivery is up to 5 working days, but faster deliveries are available. Please visit out Deliveries and Returns page for further details.

What material should I choose for an R3B compliant Chapter 8 chevron kit?

If your rear chevron kit needs to be R3B compliant (i.e. suitable for Highways use) please choose 3M Diamond Grade Microprismatic Red (4092), Nikkalite Crystal Grade Microprismatic CVF Red (92805) R3B or Orafol 6900 Brilliant Grade Microprismatic Red (030).

I need rear chevron kits for corporate vehicles, but they don’t need to be R3B compliant. What material should I choose?

Either Nikkalite FEG or Oralite 5200 Rapid Air rear chevron kits are suitable for this usage, as they provide extra visibility, but do not comply with R3B guidance.

I need a Chapter 8 kit that I can take off of my vehicle easily. Do you have anything that would be suitable?

Yes – our magnetic Chapter 8 kits are perfect for this. The Chapter 8 kit is produced and applied to magnetic rubber for a really easily removable Chapter 8 kit. Before you order a magnetic rear chevron kit please check that this would be suitable for your vehicle (some vehicle rears are made up of many plastic parts, so are unsuitable for magnetic options).

We can also manufacture a fully removeable version of any of our Chapter 8 kits by placing the fluorescent and reflective markings onto a removable vinyl. This would last up to 12 months and is perfect for lease/short term hire vehicles. For further details, please call our team on 0344 2098775.

Do you supply door lozenges?

Yes – Highways compliant door lozenges are supplied as standard and at no extra cost with every Chapter 8 kit you order. Door lozenges are a very important part of your reflective vehicle markings – no kit is complete without them!

My vehicle has suffered accident damage – can I replacement parts for the kit?

To order replacement panels, call or email into the office with the order number for that particular kit. We will aim to deliver all replacement parts within 3-4 working days. We are developing the opportunity to order replacement parts on the Chapter 8 section of our website (for panelled kits only).

Do your Chapter 8 Kits come with a warranty?

As a certified approved convertor for 3M, Nikkalite and Orafol materials, we provide a warranty for the materials and edge seal for use on vehicles on all R3B compliant prismatic products:-

 

3M Diamond Grade Microprismatic Red (4092) – 10 years

Nikkalite Crystal Grade Microprismatic CVF Red (92805) R3B – 10 years

Orafol 6900 Brilliant Grade Microprismatic Red (030) – 10 years

R3B Non Compliant highways products:-

Nikkalite FEG – 5 year Warranty

Orafol 5200 Rapid Air – 3 Year Warranty

 

All fluorescent yellow materials from 3M, Nikkalite & Orafol are warranted for 3 years as part of your kit warranty.

 

If we provide a fitting service as part of your order, we will offer the same warranty on the fitting as we give for the materials shown above (for use on vehicles only). This is supplied as part of our complete convertor warranty package.

Ready to get your fleet covered?

Get in Touch