Chapter 8 chevron kits are a must for any works vehicle that will be travelling on highways and entering works sites around the country. These highly effective ready to apply conspicuity kits are applied to the rear of fleet vehicles. The fluorescent yellow and reflective red chevrons increase visibility of the vehicles, keep entire fleets safe and help to maximise the safety of other road users too.
Each of the Chapter 8 rear chevron kits that we manufacture comply with Chapter 8 of the DFT Traffic Signs Manual, many also being R3B compliant. Your fleet is safe in our hands.
We know that along with rear chevrons, there are a whole host of other essential products that help to keep your work force safe and your fleet vehicle markings in tip top condition. That’s the driving force behind Fleet ID Blazon. This suite of safety products is designed to give you all the required vehicle markings, vehicle text decals, Chapter 8 signage, lightbars, traffic cones and barriers to keep your fleet safe and in full working order.
When you order Chapter 8 chevron kits from Fleet ID, all of these essentials are available at the click of a button too. Everything needed to keep a busy fleet road safe and ready for anything.
Fleet ID Blazon Chapter 8 kits are manufactured from the highest quality reflective red and fluorescent yellow materials. With our R3B compliant options, you can also choose to add text decals such as Highway Maintenance text.
Buy Chapter 8 kits hereOrder all of the additional extras you may need for your fleet right here. Fleet ID Blazon Chapter 8 signage and barriers provide and easy to use signage solution, helping to raise the safety levels around your workforce.
Buy signage and barriers hereFor those applying their own chevron kits and vehicle decals, you’ll need all the tools for the job. Fleet ID Blazon application tools allow for the smooth application of safety markings, helping to ensure the durability of the chevrons and providing that professional finish.
Buy application tools hereThe Fleet ID Blazon range of light bars offer quick and easy solutions to lighting requirements. These light bars simply plug into the cigarette plug within the vehicle and attach either magnetically or with suction pads. No need for big alterations to your vehicles.
Buy light bars hereTake the pain out of keeping your fleet fully marked and road ready with Fleet ID Blazon. Now you can add vehicle text, Chapter 8 signage and traffic barriers and cones to your Chapter 8 order! Everything you need – all in one place.
If the vehicles will be operating or stopping on highways or entering work sites, then R3B compliant kits are needed. Select R3B Compliant when ordering your Chapter 8 kits.
We supply full rear, half rear or full glazed Chapter 8 kits.
Which one you choose just depends on the type of vehicle you have and whether there are rear windows that you would like to keep clear.
You can choose from a number of vehicle text options to add to your Chapter 8 kits, including Highway Maintenance and Abnormal Load. These are available to order at the time of ordering your Chapter 8 kits.
All of our rear chevron kits are easy to apply, but we have planked, flooded separate and flooded applied to choose from.
There is also a magnetic option for those who need the kit to be popped on and off the vehicle as and when required.
Take the pain out of keeping your fleet fully marked and road ready with Fleet ID Blazon. Now you can add vehicle text, Chapter 8 signage and traffic barriers and cones to your Chapter 8 order! Everything you need – all in one place.
Conspicuity markings can reduce accidents, can save lives and improve the visibility of the vehicle.
Fewer accidents mean less downtime, less contracts missed and savings on repair costs.
Reassure and motivate your workforce by taking their safety seriously and meet the highly recommended best practice guidance of TSM Chapter 8.
Protect your company against potential legal action related to third party safety.
We manufacture chevron kits from 3M Diamond Grade Microprismatic Red (4092), coupled with 3M Saturn fluorescent yellow for a durable chapter 8 kit. R3B compliant.
Product specificationThere are two Nikkalite products to choose from – Nikkalite Crystal Grade Microprismatic CVF Red (92805) (R3B compliant) and Nikkalite FEG (Flexible Engineering Grade). Both products offer high quality, just for different types of roads.
Product specificationThere are two reflective materials to choose from the Oralite range. For R3B compliant Chapter 8 kits, choose Oralite 6900 Brilliant Grade Microprismatic Red (030) and for all other uses Oralite 5200 Rapid Air is also available.
Product specificationOur Chapter 8 kits are supplied edge sealed which stops all dirt and water penetration to the cells in the panel ensuring there is no block to the light source. This keeps the reflective to the proper standard for its intended purpose.
All major vehicle manufacturers are covered by Fleet ID Blazon chevron kits. You can order Chapter 8 kits for any vehicle from Audi to Volkswagen! Browse through the manufacturers to find yours. Alternatively, if you know your registration number, pop it into the reg look up at the top of the page to be directed straight to the correct kit for you.
All major vehicle manufacturers are covered here – you can order Chapter 8 kits for any vehicle from Audi to Volkswagen! Browse through the manufacturers to find yours. Alternatively, if you know your registration number, pop it into the reg look up at the top of the page to be directed straight to the correct kit for you.
An application guide showing all steps for the application process is supplied with every Chapter 8 kit order you will receive. This will help to ensure best possible application of your ordered Chapter 8 kit and answer any queries you may have about this process.
Click here for a full application guideWe work hard to ensure that we are supplying the best possible materials and converting them into the best possible Chapter 8 chevron kits. You can find out more about the certifications we hold at the link below.
Click here for converter certificationsEvery kit we produce meets the standards set by REMA in manufacture, sealing and installation. Click on the link to find out more about REMA’s specific material requirements.
Find out more about REMA’s requirementsThere are a few things to consider carefully before ordering a Chapter 8 kit and our online shop helps to guide you through all of these decisions. The key things to remember are to ensure you know the model of vehicle you are ordering for, then all you need to decide is which material to have, how much coverage and what type of kit. For more information about all of these points click here.
The application of Chapter 8 kits is straight forward – just remember to give yourself the best start. This means cleaning the vehicle thoroughly prior to application and having all the right tools for the job. The type of kit you have will also determine the type of application that is required. A magnetic kit is the quickest! Find a full application guide here.
If your rear chevron kit needs to be R3B compliant (i.e. suitable for Highways use) please choose 3M Diamond Grade Microprismatic Red (4092), Nikkalite Crystal Grade Microprismatic CVF Red (92805) R3B or Orafol 6900 Brilliant Grade Microprismatic Red (030).
Either Nikkalite FEG or Oralite 5200 Rapid Air rear chevron kits are suitable for this usage, as they provide extra visibility, but do not comply with R3B guidance.
Yes – our magnetic Chapter 8 kits are perfect for this. The Chapter 8 kit is produced and applied to magnetic rubber for a really easily removable Chapter 8 kit. Before you order a magnetic rear chevron kit please check that this would be suitable for your vehicle (some vehicle rears are made up of many plastic parts, so are unsuitable for magnetic options).
We can also manufacture a fully removeable version of any of our Chapter 8 kits by placing the fluorescent and reflective markings onto a removable vinyl. This would last up to 12 months and is perfect for lease/short term hire vehicles. For further details, please call our team on 0344 2098775.
Yes – Highways compliant door lozenges are supplied as standard and at no extra cost with every Chapter 8 kit you order. Door lozenges are a very important part of your reflective vehicle markings – no kit is complete without them!
To order replacement panels, call or email into the office with the order number for that particular kit. We will aim to deliver all replacement parts within 3-4 working days. We are developing the opportunity to order replacement parts on the Chapter 8 section of our website (for panelled kits only).
As a certified approved convertor for 3M, Nikkalite and Orafol materials, we provide a warranty for the materials and edge seal for use on vehicles on all R3B compliant prismatic products:-
3M Diamond Grade Microprismatic Red (4092) – 10 years
Nikkalite Crystal Grade Microprismatic CVF Red (92805) R3B – 10 years
Orafol 6900 Brilliant Grade Microprismatic Red (030) – 10 years
R3B Non Compliant highways products:-
Nikkalite FEG – 5 year Warranty
Orafol 5200 Rapid Air – 3 Year Warranty
All fluorescent yellow materials from 3M, Nikkalite & Orafol are warranted for 3 years as part of your kit warranty.
If we provide a fitting service as part of your order, we will offer the same warranty on the fitting as we give for the materials shown above (for use on vehicles only). This is supplied as part of our complete convertor warranty package.
Standard delivery is up to 5 working days, but faster deliveries are available. Please visit out Deliveries and Returns page for further details.